Bioethanol fireplace insert package - 30.5 cm

Product Description

Bioethanol fireplace insert for conventional stove

If your old wood-burning stove needs new life in the form of living flames, here's your chance for a quick solution. You will receive a freestanding bioethanol fireplace insert. It is placed freely inside your existing wood-burning stove or open fireplace. Afterwards, the fireplace insert is decorated with the provided decoration wood, after which glow flame fibres are added, which create an even more authentic glow effect from the fireplace.

Change from a wood burner to a bioethanol fireplace and get:

• An eco-friendly and sustainable combustion
• A fast ignition process - flames are formed in seconds
• A cleaning and maintenance-free fireplace
• A fireplace without soot, smoke, and ash

How to install the conversion package:

It is quite simple to install as no special installation is required. Basically, you just unpack the products from the packaging and place them as desired in your old oven. The insert itself is typically placed in the middle of the fireplace or where they provide the best view of the flames in the room. Decorative fires are placed around the insert - and preferably on top - but not in the flames themselves.

Glowing fibres are provided, which are pulled apart and placed in the flame to give a glowing effect. These fibres have a lifetime of approximately 300 hours.

This is included in the pakcage:

• Bioethanol fireplace insert - 30,5 cm
• Extinguishing- and adjusting tool
• 2x decoration packages with 5 pcs. of wood
• Glow Flame Fibre
• 12 litres of bioethanol fuel
• Long safety lighter
• 10 different scented oils

This gives you everything you need to create a safe, eco friendly and comfortable fireplace solution for your old fireplace or wood-burning stove.

NOTE: When using this conversion package, it would be ideal to close the chimney or flue if a heat effect from the bio fire is desired. However, this will require that the fireplace is open and that the lids are removed or at least left open. This is because the burner needs oxygen to burn.