Flush mount enclosure for Design 2400

Heatstrip Design 2400 Flush mount enclosure (matte black)

This flush mount enclosure can be used with the Heatstrip Design 2400 model, specifically for the installation in ceilings. The mount makes it particular useful if you do not wish for the heater to take up space in the room, and instead integrate it smoothly into a ceiling. The enclosure matches the black design of the patio heater.

It is recommended to clean the flush mount enclosure once every three months. This is due to potential filth and grime may accumulate in it. In case smoking takes place near the heater, it may be necessary to clean it more often. Cleaning it can be done with a wet cloth without the use of strong cleaning agents.

Features

• Designed for use indoors and outdoors
• Easy to install
• Designed for the Heatstrip Design 2400
• Length: 126 x Height: 24 cm
• Screws for mounting not included

Installation

When installing the flush mount enclosure, it is important that wires, insulation or other flammable materials are not in direct contact with it.

• Recommended mounting height: 2.3-2.5 metres
• Maximum mounting height: 2.7 metres

If the heater is installed at a height greater than the maximum, the efficiency of the heater can diminish.

The manual includes more elaborate descriptions when installing the flush mount enclosure.