Flush Mount Enclosure for Heatstrip Design 3200
Item number: ELP-70-153
MPN: THDAC-059
0 in stock
Delivery time: 3-5 weeks
Free shipping on orders above £99
Product description
Black flush mount enclosure fitting for the Heatstrip Design 3200 patio heater.
Read more
Heatstrip Design 3200 Flush Mount Enclosure
This flush mount enclosure is used with the Heatstrip Design 3200 for mounting it seamlessly into ceilings. By using this flush mount enclosure, it is possible to integrate the heater smoothly into the ceiling and preventing it from taking unnecessary space on the floor.
It is recommended to clean the flush mount enclosure once every three months. This is due to potential filth and grime may accumulate in it. In case smoking takes place near the heater, it may be necessary to clean it more often. Cleaning it can be done with a wet cloth without the use of strong cleaning agents.
Features
- Designed for use indoors and outdoors
- Easy to install
- Designed for the Heatstrip Design 3200
- Hole cutout dimensions: 179 x 24 cm
- Screws for mounting not included
Installation
When installing the flush mount enclosure, it is important that wires, insulation or other flammable materials are not in direct contact with it.
- Recommended mounting height: 2.3-2.5 metres
- Maximum mounting height: 2.7 metres
If the heater is installed at a height greater than the maximum, the efficiency of the heater can diminish.
The manual includes more elaborate descriptions when installing the flush mount enclosure.
