Glow Flame Fiber for Bio Fireplace

Product Description

Glow Flame

Innovative fiber material to be used both in gas and bioethanol fireplaces. Its purpose is to make a fireplace even more breath-taking. The material is fully safe and environmentally friendly, as it does not consist of any harmful substances. One pack of Glow Flame includes 1 gram of ready-to-use fiber, which is thinner than human hairs' diameter. It is resistant to high temperatures and can be used for up to 300 hours.

Instructions

First, take the fiber out of the package and spill them unevenly on a surface, the size of a A4 paper. Individual sections of the material will mix with each other in such a way, that the clots will appear. Seperate the fibers, so that the net of the fibers isn't be too thick, as it will decrease the flow of embers through the material. After you've done this, put the Glow Flame in the fireplace. Place the prepared fibers as close to the burning chamber as possible. Because of the weight of the fibers, it should not be used outdoors or in places where wind can blow them out of the fire. However, should it happens that the fibers is blown out of the fireplace, there is no risk of an unpredicted fire, as the material will stop "burning" as soon as no heat is applied. Glow Flame can be used with other decorative items, such as ceramic pebbles or logs.

NOTE

Remember to take the fiber out off the fireplace before you extinguish it, as it can cause the bioethanol ignite again. This could be done with the extinguising tool that comes with the fireplace.